Equipment required for blade mounting

Pneumatic StandWe have created specialist kits to help the dealer to ensure your blades are fitted to the highest standard.
Dealers can use the fixed EDEA skate mounting tool to ensure maximum accuracy when fitting the blades.
We recommend that you take your skates to a recognized Edea dealer for blade mounting.
If you want to watch how it’s done then take a look at this video.
The main differences with our hi-tech boots are:
forarescarpa1. Blade mount holes need to be pre drilled.
You need to drill right through the thickness of the sole. For the heel we recommend drilling to a depth of about 2cm. This should be done quickly so the waste material from the sole can be removed.
viti e sottopiede lama2. The hi-low screws need to be inserted slowly. This allows the double helix to bite into the sole material. For best results and to ensure the blades are balanced tighten the screws alternatively in a cross pattern. Screws should be tightened using 5n force – they should not be over tightened.

NOTE:
FOR PERFECT RESULTS HOLES AND SCREWS NEED TO BE CORRECT .
Both drilling and fixing of the screws need to be perpendicular to the sole.
If the holes are drilled at an angle or the screws tightened at an angle the blade will not be properly mounted.